![]() She diagnosed it with one look up my right nostril. I finally went to my doctor when I realized the horror in my nose was not going away. So, totally unaware that I was incubating staph or strep or both in my old jar of coconut oil, I was blithely sticking it up my nose for lubrication & moisture, thereby giving myself ➡️IMPE-FUCKING-TIGO⬅️ in my nostrils. So, at the end of this winter, we (I, my lazy ass was tard of filling them) let the humidifiers run dry too early, with the result of dry air & dry nose for moi. Yeah, I’m wrong – at least as far as the small jar of it that has been sitting on my sink for the last few years & indiscriminately used for all orifices (well, above the neck, thank JAYZUS!) when dryness hits. I have a strong belief that coconut oil is the panacea for all ills. I hope you’re laughing at the horror of it, cuz I am!Īhhhh, my nose…. I have more shit-stained clothes than I ever had since getting out of diapers. That was the final straw from which I started the Imodium regimen. When my son was here 3 weeks ago, I stood up from my chair all unsuspecting, & had a gusher of diarrhea right then & there. Prolly end up having another colonoscopy. My gut: Unending, horrifying diarrhea (prolly due to lack of gall bladder), for which I finally wised up & started taking an Imodium pill every day or so. My own travails, for which I am going to doctors on 7/12-13, are based in my gut & my nose/ear, sigh. The Headology approach is also very similar to Susan Sto Helit ‘s practical approach to children’s problems since the child already believes in Bogeymen, then you may as well go along with it and teach them that they can also very firmly believe in the fireplace poker, too.v *Headology: “It has been said that the difference between headology and psychiatry is that, were you to approach either with a belief that you were being chased by a monster, a psychiatrist will convince you that there are no monsters coming after you, whereas a headologist will hand you a large stick and a chair to stand on. “This horror will grow mild, this darkness light.” ― John Milton, Paradise Lost These are just the physical ailments, not going into the headology* problems (do you read Terry Pratchett novels? I swear, they are all that have been getting me through these political times. I’ve been reading about your medical travails, and, while mine are nowhere near as dire as yours, I decided to share them with you. You know nothing of my work.” And he’s right and I laughed. ![]() Y’all need to get your shit together, okay?”Īnd then Victor said it was more like the look that Jesus probably gives when people are being shitty to other people and are like, “I’M DOING THIS IN THE NAME OF JESUS” and Jesus is like, “Oh God. Y’all are just lucky that vengeful Jesus is busy appearing on a tortilla because he would not put up with this ridiculousness. Forgive them Father, because a lot of them are dumbasses, a pparently. I told Victor is was like this Jesus was channeling your sassy gay friend and Victor was like, “Who…Kevin?” and then I gave him the above Jesus look and showed him these videos, but he still said $25 was too much to pay to have Jesus disappointed in you:Īnd then I held Jesus in front of my face and said, “WELP. ![]() If he had a thought bubble it would be him looking at God like, “I know, right?” Or perhaps an audible sigh of disappointment as he muttered, “Ugh. ![]() It’s the same look I give the cats when I find them back-kicking the giant pile of toilet paper they’re currently shredding into a nest after they’ve unravelled the last roll in the house. He is my favorite personal Jesus and I assume this is what He looks like all the time when He reads this blog. “What is wrong with these people?” ~ Jesus Most Jesuses (Jesusi?) fall under the subsets of “Caring Shepard Jesus” or “Vengeful Threatening Jesus” or “Peaceful Hippy Jesus” or “Fat Baby Jesus” but this is the first time I’ve ever seen sassy, eye-rolling Jesus who is adorably fed up with your continued poor decisions and silliness but is resigned to the fact that you can’t even seem to stop yourself from fucking up. More specifically I found Jesus on a wall pocket at a thrift shop and Victor wouldn’t let me buy it because he hates Jesus. ![]()
0 Comments
![]() ![]() ![]() However, they also sport carbon fiber inlays, wood accents, and a range of metal tones and finishes. We offer a wide range of women’s medical alert dog tags, from the classic, plain dog tag to elegant designs inlaid with Mother of Pearl.įor men, our medical dog tags come in the traditional silver with a red symbol and ball chain, as one might expect. The slightly rounded rectangle shape differentiates a dog tag from, say, a heart-shaped pendant. Women’s medical ID necklaces come in two styles: pendants and dog tags. Visit our collection of medical alert jewelry for kids to see options for our littlest customers. For their safety, we recommend necklaces for children aged five and up. Within our collection, you’ll find fun, brightly colored, and themed medical ID dog tags for kids. Because engravable dog tags are practical, comfortable forms of medical IDs, they are great options for the whole family. Often thought of as being a style of men’s medical ID, our emergency ID dog tags come in a variety of sizes, styles, designs, and finishes for men, women, and kids. The traditional medical alert symbol on the front is designed to alert first responders and bystanders to the presence of your custom-engraved information on the back. Made with nickel-free stainless steel, our medical ID dog tags are also hypoallergenic!Īll of our styles include a medical alert dog tag, chain, and plenty of space for custom engraving. Medical dog tags are lightweight, comfortable options that can be worn over or under the shirt, allowing you to keep your ID visible or discreet. One of the most traditional and common types of medical alert is the dog tag necklace (for humans, of course!). ![]() ![]() ![]() ![]() Veteran hijackers may miss the left-hand navigation bar that compactly listed all of the available input-source workflows the new display uses spatial and iconographic displays, which may take getting used to. Users of previous versions will need to wrap their heads around the new approach because of how distinctly different it is. This could be for a recording session, whether live or for a podcast to grab a broadcast Internet radio session to time-shift or for recording the outputs of DVDs, webinars, other real-time events, or digital-rights managed media. You can turn to Audio Hijack any time you need to capture audio. Note that Audio Hijack 3 requires OS X 10.9 Mavericks or later. A new copy costs $49 (with a 20 percent discount for TidBITS members), but Rogue Amoeba is offering a $25 upgrade to owners of any previous version. A fully functional version can be downloaded and used for recording up to 10 minutes of audio, after which noise is overlaid. Rogue Amoeba has decided on a single edition release, which is now called simply “Audio Hijack” - it offers no fewer features than its former “Pro” version, but the name is no longer suffixed with that word. It also adds new options for manipulating settings and listening to audio as it’s being captured. The just-released Audio Hijack 3 extends and improves the software, including a radical overhaul of its interface and methods of pulling together different audio elements. It’s a workflow tool for audio inputs and outputs that enables you to combine and separate sources, set timers to record audio at specific times or at recurring intervals, and add effects and filters. But Mac OS X has almost no built-in support for mixing different audio sources, which provided a perfect opening for Audio Hijack from Rogue Amoeba. On the Mac, Apple has long made it relatively easy to plug in and immediately use audio inputs, like microphones and headsets. #1668: Updated Rapid Security Responses, OS public betas, screen saver bug fixed, “Red Team Blues” book review.#1669: OS security updates, ambiguity of emoji, small business payments with Melio, Twitter now X.#1670: Arc Web browser hits 1.0 release, “Do You Use It?” polls about Apple features.#1671: Apple Q3 2023 earnings, new Beats headphones and earbuds, Stage Manager adoption rate, do you use Spotlight?.1672: The hidden power of Google Sheets, Launchpad usage levels, Emergency SOS via satellite in the Maui fires, do you use proxy icons?. ![]() ![]() is that a leak? i can make boost whenever i want except for take off buy letting off the throttle a little until it whisles just a faint whisle. The main benefit of sequential twins is that the smaller turbo spools significantly faster (especially at lower revs before the exhaust is diverted to the larger secondary), which means that there's little to no turbo lag. ![]() Later, once the VE table is tuned, you can read up on tuning injector timing if you want to further refine the tune. For now, leave it at the default of 360 across the board. Most useful at low loads and low engine speeds, it is beyond the scope of this base map to fully tune injector timing. this is what the car is doing.when i take off no matter what i do it wont make but 5 pounds of boost if i let off the gas a little you can watch the boost gauge go down a little then you can hear a whistle and the car will pick up speed letting off the gas because the turbo kicks in soon as it whisles you can push it to the floor and it will make 10 to 15 pounds? now just 2 days ago i was driving and it was doing the same thing but something has happened because now when it makes boost it makes a loud shkoooooooooooooooooooooo sound. This is the 'sequential' in 'sequential injection'. Granted, single has other advantages, and it is debatable whether that bit of extra low end really makes that big of a difference. You can especially feel it in daily driving, like when taking off from a stoplight. also i have a aftermarket boost gauge.i have no boost control. EFR 7670 comes close, but still spools 500 RPM later than properly functioning sequential twins. is that a upgrade and if it is is it better than the filters that most people have on the cars. its not the square box that says mazda like the factory box it is a dimond shaped box that runs into the intercooler. non-sequential Derived terms sequential algorithm sequential continuity sequential compactness Share on Facebook Share on Twitter. 426 RWHP and 365 RWTQ was made at 18 psi of boost The Stage 3s have many improvements over the factory HT12 turbochargers. alot of people tell me that the air box has been upgraded. As adjectives the difference between subsequential and sequential is that subsequential is subsequent while sequential is succeeding or following in order. greddy turbo timer, i bought a apex blow off valve but havent used it cause of the turbo problem.now answer me this. dont know why the owner before me did that. ![]() i am guessing on the has factory cat but it has a upgrade greddy cat back. ![]() ![]() The actress also said that the process of filming the scene felt "rushed," partially because director David Nutter (who helmed the episode) has a fast speaking voice to begin with, but that didn't throw her off. Arya Stark's hookup with Gendry in Game of Thrones Season 8, Episode 2 was so surprising that actress Maisie Williams thought it was a prank at first. "No one wants to make you feel uncomfortable which kind of makes you feel more uncomfortable, because no one wants to look at anything that they shouldn’t look at which in turn makes you feel like you look awful because everyone is kind of like-“. "In the beginning, everyone was really respectful," she told EW. Parts of the filming was "uncomfortable," Williams said. And everybody else has already done it on the show, so…" ![]() "I don’t think it’s important for Arya to flash. So I kept myself pretty private," she told Entertainment Weekly. "David and Dan were like: ‘You can show as much or as little as you want. Joseph Maxwell Dempsie (born 22 June 1987) is an English actor, best known for his roles as Chris Miles in the E4 teen comedy-drama Skins (20072008) and Gendry Baratheon in Game of Thrones (20112013 20172019). ![]() Gendry says to Davos he’s been training himself, so I think they’re both pretty handy when it comes to battle.This marked Arya's first sex scene in the show, and since it was Williams's first time stripping down as her character, Benioff and Weiss let her decide how much skin she wanted to show on camera. ![]() It certainly wouldn’t be one to be messed with. He’s spent the majority of his life in Flea Bottom with the peasants, right? What manners? So this is all kind of new for him, but there’s an element certainly from Gendry’s point of view he senses a bit of a kindred spirit, and I think it’d be really interesting to see what Jon and Gendry could do as a team. To buy his loyalty, Daenerys eventually granted Gendry his birthright, naming him as a true Baratheon and returning the lands held by his family. I think also there’s something about seeing what Jon Snow has managed to do, and the respect that he has, and how he’s been able to transcend the label of bastard, him being King in the North, I think Gendry really looks up to, and he’s also got to bear in mind that he’s a king and there’s certain etiquette that you have to respect, which I don’t think Gendry is that familiar with. After disappearing for more than three seasons, Gendry finally returned in the latter half of Game of Thrones season 7 and rather quickly became a threat to Daenerys’ reign, if only in her eyes. Gendry probably feels that he might after many, many years, finally meet someone he has common ground with, both being bastards and the confused identity that goes with that. He’s obviously heard about Jon Snow, King in the North. There is a bond there, and I hope they get to cross paths again at some point. I’m filling in my own blanks here, but I don’t imagine that Gendry ever felt that he’d been trusted like that before by anybody, and maybe the first time in his life that he was given real purpose ― the purpose being to keep a secret ― but he’s like, “Oh, someone actually trusted me with a task that’s really fucking important,” and the fact that interacting with highborns is something Gendry’s never done before, so it was almost the beginning of opening his eyes, and being conscious that there is much more out there than what he has known his entire life. Then Arya trusting Gendry with the information that she was who she was. I think Gendry really reminded Arya of her brothers back up in Winterfell, who she was missing greatly. I think they crossed paths at that time where they were both searching for something, and they kind of found it in each other a little bit. I have no idea what it would be like, but I think they must carry some torch for each other. ![]() These things are all happening at quite formative ages, so I think it’d be great to see them cross paths again. His experience with Melisandre, as you’ll see later in this season, is still something that rankles with him, something that he’s maybe not quite able to get over in his mind. As well, we don’t know what might have happened to Gendry in intervening periods. ![]() ![]() ![]() The silhouettes of the holes were drawn with the sketch tool and subtracted from the main shape. ![]() However, it’s made from polygons which you can only import as reference, so I had to remodel it.Īfter that, the body was hollowed out with a scaled-down copy of the main body shape. For the Picatinny rail, I used a model I already created in Blender and imported it. The shape gets refined by subtracting cubes from it. First, the rough shape was drawn with the sketch tool and extruded. I created the main body the same way as the grip. I will breakdown the modeling of some of the parts. Like with polygon-based modeling, it’s a good idea to start with the major shapes and work down to the details. There are some different tools, but also many tools polygon-based packages have too. Traditional polygonal modeling is more abstract and you start directly with 3D objects instead of technical 2D drawings. Modeling in a CAD software solution works differently than polygonal modeling. Only a few pieces like the cloth of the strap, the electric wire, or buttons were traditionally modeled in Blender. Modeling of the blockout was done in Fusion 360, with a polish pass in ZBrush afterward to add some details to the magazine and get a proper high poly. I also added a scope and a strap to balance out the weight of the scope during the blockout stage.Īfter the silhouette sketch, the design will be further developed in Fusion 360. In the end, I used the last silhouette, however, I changed the proportions in the blockout phase. It’s not very visible though, so I focused on the more visible parts that the player is able to see all the time. The feeding mechanism of the magazine for example is a part that probably wouldn’t work in real life, because there is no way for the cartridges to be pushed out of the magazine. I tried to find a good tradeoff between the two. On the other hand, however, this approach is more limiting and time-consuming. In this case, it should be a sci-fi assault rifle with a weird magazine.Ī big inspiration was efficient modern manufacturing methods like CNC machining of metals and plastic injection molding.Ī believable functionality is important for the realism of the design, so I tried to not make it too unrealistic. ConceptĪt first, I start with some silhouette sketches to find a good silhouette and specify the design more after having a general idea. Rendering and baking were done in Marmoset Toolbag. The textures were created in Substance Painter. The main modeling software was Fusion360, Blender was used for smaller details and creating parts of the low poly and the high poly render. The scope of this project was to get to know Fusion 360 better, try out retopology workflows to quickly produce game ready meshes from Fusion models, and also work on my concepting skills. ![]() ![]() ![]() ![]() You can make a garland, beautiful wall compositions, decorate any objects with them. Here are the butterflies from different colors of paper. Turn it over and the origami butterfly is completely ready. Do not be afraid to press well in the area of the corner bend, and along the whole fold This will only strengthen the butterfly, raise its wings. To do this, in the place where the corner is tucked over the straight side, squeeze your fingers along the fold, guiding it slightly inward. Pull it up.Īs a result of these actions, the corner will pull the lower side a little, which is what we need.įold the little corner of the upper side and press it well.īutterfly is done, you need only to give the desired bend. Point one bottom corner up.ĭo it in such a way that it is above the upper broad side of the triangle. Turn the part on the other side, for convenience, place the wide side up. Now bend the corner of the triangle with one side up, aligning with the middle fold line and bringing it to the top corner. Fold the bends they should be in the form of a snowflake.ĭirect the two side folds inward, as it is shown in the photo. Next, you need to fold the corner to the opposite corner to form a triangle, and then just put the two other corners together. A larger piece of paper with create a large butterfly while a smaller square will mean a small butterfly. The size of your butterfly will depend on the size of your paper. ![]() Then open up the square and TURN IT OVER. Step 1: Prepare Your Square Paper Start with a square piece of paper, either origami paper or any thin paper cut into a square. Open up the paper and repeat with the other 2 corners. Straighten the paper, the fold is clearly visible.įold in half again, but folding the other two sides together. Fold the square of paper in half so that the corners meet up and you form a triangle. To do this, fold the paper in half, for a start, side by side, smooth out the fold well. Make four folds on this square, from the corners, and from the sides. Hello everybody In this video, Im going to teach you how to make the easiest origami rose youll find on the internet.This model is very good for Mothers. Choose the size, depending on what size the butterfly you want. These paper butterflies are so attractive that you will want to make more and more of them, experimenting with colors and sizes.įor the crafts you need a piece of square paper. The templates are sized to print on 8.I present a step-by-step briefing on how to create a DIY origami butterfly. These templates were made using clipart from Litke Designs Co, with permission. There are two different templates:Ĭlick here for the first Butterfly template (the blue/purple butterfly you see in this post)Ĭlick here for the Monarch Butterfly template (orange butterfly in this post) Then you can trim around the square, and follow the video below to fold it into a butterfly. I think these templates are pretty fun! Just print one out and color in the four wing triangles. So I combined both of those things into today’s easy project: print and color origami butterfly templates. I just find it really calming to do something with my hands that doesn’t require very much brain power, like origami or coloring. I love easy origami that I can do without having to think too hard. Just choose your template, print it out, color it in, and follow the video to fold it into a butterfly. In today’s post: Learn how to make a gorgeous origami butterfly with these printable templates. ![]() ![]() The real prize, in my opinion, is the built-in 50′ laser distance measurer (accurate to 1/4” in 50′). ![]() Everything’s Better With Lasers – The LTM1 Aims To Please Taking measurements with the laser feature is as easy as pressing the red button. And depending on how rough you are, it has a fairly solid standout of at least 65”. The one foot intervals are clearly marked and – for those of you framing walls – the tape has distinct markings every 16”. The tape is numerically labeled in both inches and 1/8″ fractions and includes tick marks for 16ths and 32nds. ![]() The 16′ x 3/4” measuring tape works just like any other pull it out and take your measurement. The LTM1 2-In-1 Laser Tape Measure by General Tools has proven to be rather handy. 2-In-1 Laser Tape Measure Model LTM1 – General’s Command The LTM1 has a nice wide metal belt clip. It shouldn’t take us any longer than, say, 50 feet or so. They sent us one to check out so let’s take a quick look at the LTM1 2-In-1 Laser Tape Measure. ![]() But why choose one or the other when you can be extra fancy and have both?! General Tools just released a 2-in-1 measuring tool combining a 16′ tape and 50′ laser in a single package the size of a standard tape measure. After all, how else can one verify the $5 sub he just bought is really a foot long? For greater spans you may prefer the convenience of a laser distance measurer. Whether you’re a tradesman, DIYer or just a Human, you likely find yourself reaching for the old ticked stick every now and then. The “rule” of thumb is that everyone should own a tape measure or ten. ![]() ![]() Put them into the refrigerator or the freezer for long-time usage. To store fresh hearts of palm, you should clean them first using kitchen towels, then tightly seal them in a container or wrap them with some nylon bags. Therefore, their price is not always comfortable. They are easily perishable, which is more complicated to preserve. The fresh ones are hard to buy and may not be available at most groceries or supermarkets. If they are left at room temperature, they will surely go bad earlier than you thought. Once you unseal the can, you should move and store them in the fridge for the best usage. Make sure that there’s no sunlight getting in, or else this veggie may get rotten easily even though they are not opened. You can store the hearts of palm in your pantry, but choose somewhere dry and cool. They are more common and easier to find on the market year-round, and can also be purchased online. Hearts of palm are usually sold in supermarkets in the canned form. Hearts of palm are well-prepared and soaked in a signature liquid then sold as can or jar. These two types require distinctive methods to store because of their texture and taste. The hearts of palm usually appear in two different forms: fresh and canned in a tin. Let’s see in what ways you can store them and how long they last! Best Ways To Store Hearts Of Palm After Purchasing They consist of different shelf life and methods to store. You will feel this unique texture right at the very first bite! How To Store Your Hearts Of Palm Properly?īoth canned and fresh hearts of palm need to be stored properly for the best quality before using. They are also supple and chewy to describe. It is not the ordinary crunch, but a mixture of crunch and softness. The crunch texture of hearts of palm is also a special characteristic to talk about. The creamy and tender flesh makes them adaptable to many dishes. You can take a closer look at the sliced hearts of palm to imagine their texture!īesides the taste, the texture of hearts of palm is also a highlight! It can be described to stand between the white asparagus, water chestnut, and once again, artichoke heart. Also, the slight crunch is not available. Therefore, the taste is more robust with a slightly acidic flavor than the fresh. They are packed in brine or an acid liquid similar to that of canned artichoke hearts. The canned or jarred hearts of palms taste different from the fresh ones. Of course, they are not 100% alike, but it’s good enough for a vegan-friendly dish. The mild flavor may sound bland at first, but this point is also an advantage of heart of palm being an ingredient in a diversity of dishes.īy the unique and versatile taste, hearts of palm can stand in for meat and seafood in some vegan recipes since their taste can mimic the taste of meat and seafood really well. Overall, hearts of palm taste subtle, delicate, nutty, and vegetal. The main taste is often compared to artichokes, but they are somehow milder. Their skin may be a bit rough, but the flesh is very tender, a bit chewy, and pleasant, with a slight crunch and a hint of sweetness in the mouth. Hearts of palm have a beautiful white to ivory color. Now it’s the most important part of this article! How can you imagine the taste of hearts of palm if you haven’t eaten them yet? Read the following words to figure it out! Flavor Of Fresh Hearts Of Palm Want to see how palm cabbage is collected? Here’s the video you’re looking for! People also slice and stir-fry or sautée them for sandwich fillings or form into patties for some delicious cakes. In culinary preparation, hearts of palm are also boiled, roasted, fried, braised, grilled, etc., for many purposes and dishes. ![]() They are usually used in salads, dipping sauces, and as an alternative to meat or seafood in vegan-friendly dishes. Then, they are packed in brine and canned for manufacturing. ![]() The fibers are removed during processing, showing the core, or so-called heart of palm.Īfter being harvested, hearts of palm are cut into cylinders or rings. In order to harvest the cultivated young palm, the palm tree is first hacked to the ground and the bark is scraped off, revealing a white core inside. They are also a popular choice for salads with versatile appearance and flavor. They look like the white asparagus without the tips and taste somehow like artichokes. The average length of hearts of palm can range from 3 to 5 inches long with 1 inch in diameter. As the name suggests, they are cut from the tender center part of certain varieties of palm trees, such as coconuts, peach palms, or sabal palms. Hearts of palm, or also called palmito, chonta, palm cabbage, come from South and Central America. Are you curious about heart of palm? Read this post and you won’t be disappointed! What You Should Know About Hearts Of Palm ![]() ![]() Boys and Girls Socks and Underwear: All Sizes.Tennis Shoes for Boys Little Sizes: 6 through 13.5.Tennis Shoes for Girls Little Sizes: 6 through 13.5.Tennis Shoes for Teen Boys Men’s Sizes: 7 through 12. ![]() ![]()
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |